Agfa 2100 Manual do Utilizador Página 162
- Página / 230
- Índice
- RESOLUÇÃO DE PROBLEMAS
- MARCADORES
Avaliado. / 5. Com base em avaliações de clientes
7.3 Replacing the EP-S Cartridge
When the 16 TONER LOW message is displayed, it means that the printer
is either running out of toner or the toner is not being distributed evenly.
Before replacing the EP-S cartridge, make sure that the toner is really
depleted. Rock the cartridge back and forth gently to redistribute any
remaining toner as shown in Figure 7–1.
Figure 7–1: Rocking the EP-S Cartridge
Fig 7-25, MLO-004362
Reinstall the cartridge and try printing. If the toner low message does not
appear or printing is acceptable, the cartridge will last for a while longer.
If the toner low message remains on and the print quality is not acceptable,
you need to replace the EP-S cartridge.
Replacing the EP-S cartridge requires the following:
• Cleaning the fixing roller
• Replacing the fixing roller cleaner
• Cleaning the transfer corona wires and discharging pins
You should perform all of these procedures each time you replace the EP-S
cartridge to ensure optimum print performance.
7–20 DEClaser 2100 Printer Operator’s Guide
- DEClaser 2100 Printer 1
- Operator’s Guide 1
- Contents 4
- Chapter 3 The Control Panel 5
- Chapter 5 Print Media 6
- Chapter 6 Troubleshooting 6
- Chapter 7 Maintenance 7
- Chapter 8 Service 7
- Appendix C Specifications 7
- Appendix D LN03 Compatibility 8
- Software Requirements 11
- Document Structure 12
- Associated Documents 13
- Convention Meaning 15
- Safety Information 16
- Laserstrahl 17
- 750-850nm 17
- Printer Components 18
- MLO-004826 19
- Printer Components 1–3 20
- MLO-004827 21
- Printer Components 1–5 22
- MLO-004828 23
- Printer Components 1–7 24
- 1.2 Required Operating Space 25
- MLO-004346 26
- MLO-004844 26
- Printer Components 1–9 26
- Operating Information 27
- 2.2 Powering the Printer Off 29
- 2.3 Opening the Top Cover 30
- 2.4 Closing the Top Cover 32
- 2.5 Selecting the Output Tray 33
- 2.6 Loading Paper 36
- 2.7 Feeding Media Manually 40
- Manual Feed 41
- Fig 2-21, MLO-004834 46
- 2.8 Using Duplex Printing 47
- 1. Open the rear output tray 48
- Fig 2-23, MLO-004835 48
- Fig 2-24, MLO-004833 48
- Fig 2-28, MLO-004833 52
- Fig 2-29, MLO-004834 52
- 2.9.1 Feeding Envelopes 53
- Fig 2-30, MLO-004835 54
- Fig 2-31, MLO-004836 54
- Fig 2-34, MLO-004833 58
- Fig 2-35, MLO-004834 58
- Fig 2-39, MLO-004366 61
- Operating Information 2–35 61
- Figure 2–1: Engine Test Print 63
- Fig 2-40, MLO-004525 63
- Operating Information 2–37 63
- 2.12 Printing Test Print A 65
- Figure 2–2: Test Print A 66
- Fig 2-42, MLO-004851 66
- Table 2–2: Test Print A 67
- Operation Display Reads 68
- 2.13 Printing Test Print B 69
- Figure 2–3: Test Print B 70
- Fig 2-43, MLO-004852 70
- Operating Information 2–45 71
- 2.14 Printing the Font List 72
- Figure 2–4: Font List 73
- Fig 2-44, MLO-004853 73
- Operating Information 2–47 73
- 2.16 Resetting the Printer 76
- The Control Panel 77
- Item Function 78
- The Control Panel 3–3 79
- 3.1.1 Entering Keypad Mode 80
- The Control Panel 3–5 81
- Key Function 82
- Printer Configuration 83
- 4.1 Entering Menu Mode 84
- Printer Configuration 4–3 85
- 16 Characters 87
- 4.2.2 Displaying Menu Values 88
- 4.3.1 Operating Memory 89
- 4.3.2 ROM (Read-Only Memory) 90
- Printer Configuration 4–11 93
- Printer Configuration 4–13 95
- MLO-004857 97
- Printer Configuration 4–15 97
- 4.5 Menu Descriptions 98
- Printer Configuration 4–17 99
- 4.5.1 FEEDER Menu 100
- 4.5.2 LAYOUT Menu 101
- Feeding Direction 102
- MLO-004858 103
- Printer Configuration 4–21 103
- 4.5.3 COPY Menu 104
- 4.5.4 COMMAND Menu 104
- 4.5.5 INITIAL Menu 105
- Device ID Value 106
- User Preference 107
- Character Set Value 107
- 4.5.6 INTERFACE Menu 109
- Feature Values Description 110
- Print Media 113
- 5.1 Paper Specifications 114
- Catagory Specification 115
- 5.2 Envelope Specifications 116
- Fig 5-4, MLO-004862 118
- Fig 5-5, MLO-004863 118
- Table 5–3: Transparency Sizes 120
- 5.4 Label Specifications 121
- 5.5.1 Paper Handling 122
- 5.5.2 Paper Storage 123
- Troubleshooting 124
- 6.2 Printer Status Messages 125
- 6.3 Operator Call Messages 126
- 6.4 Software Error Messages 127
- Troubleshooting 6–5 128
- 6.5 Service Call Messages 130
- 6.6 Common Operating Problems 130
- NO POWER 131
- NO PRINTOUT 131
- Troubleshooting 6–9 132
- POOR PRINTING 133
- MISCELLANEOUS 133
- 6.7 Paper Jams 134
- Fig 6-5, MLO-004892 137
- Maintenance 143
- Fig 7-6, MLO-004366 148
- Fig 7-14, MLO-004873 153
- Fig 7-15, MLO-004889 153
- Maintenance 7–11 153
- Fig 7-16, MLO-004366 154
- Fig 7-20, MLO-004873 157
- Maintenance 7–15 157
- Fig 7-22, MLO-004873 159
- Maintenance 7–17 159
- Fig 7-29, MLO-004890 165
- Maintenance 7–23 165
- Fig 7-30, MLO-004354 166
- Fig 7-33, MLO-004356 168
- Fig 7-34, MLO-004357 168
- Fig 7-35, MLO-004358 169
- Maintenance 7–27 169
- Fig 7-46, MLO-004366 177
- Maintenance 7–35 177
- Chapter 8 182
- Appendix A 184
- A.1 Positioning Controls 185
- CSI Pn ‘ 186
- CSI Pn j 186
- CSI Pn a 186
- CSI Ps ;...; Ps g 186
- CSI Pn d 187
- CSI Pn k 187
- CSI Pn e 187
- A.2 Margins and Spacing 188
- CSI Pn1 ; Pn2 r 189
- CSI Ps z 189
- CSI Ps1 ; Pn2 ; ... Pn11 SP z 189
- GSM—Graphic Size Modification 190
- GSS—Graphic Size Select 190
- CSI Ps SP J 191
- CSI ?Ps SP J 191
- CSI Ps SP K 191
- CSI Pv ; Ph SP G 192
- CSI Ps SP I 192
- CSI ?Ps SP I 192
- CSI Ps SP L 192
- A.3 Set/Reset Modes 193
- A.4 Fonts and Character Sets 194
- DSC Ps ! u D...D ST 195
- DCS Ps ~ id_string ST 195
- SGR—Select Graphic Rendition 198
- —(Digital Private) 198
- A.5 Miscellaneous 199
- CSI Ps ! } 200
- DCS 1 " { id_string ST 200
- DCS 2 " { nnn ST 200
- CSI Ps ! v 200
- CSI Ps + v 201
- CSI SP s 201
- CSI ps " { 201
- CSI Ps1 ; Pn2 ; Pn3 ; SP 201
- DECSCL—Set Conformance Level 202
- DECSDPM—Set Duplex Print Mode 202
- CSI Pn & q 203
- DECVEC—Draw Vector 204
- Accessories and Supplies 206
- Part Number Description 207
- B.1 Ordering Information 208
- Specifications 209
- Specifications C–3 211
- Pin Signal Direction 212
- MLO-004885 213
- Specifications C–5 213
- MLO-004887 214
- Specifications C–7 215
- MLO-004886 217
- MLO-004888 217
- Specifications C–9 217
- LN03 Compatibility 218
- D.3 Protocol Compatibility 219
- Glossary 221
- Error Skip 223
Manuais e produtos relacionados com Impressoras Agfa 2100
Impressoras Agfa 1815 Copier Manual do Utilizador
(116 páginas)
(116 páginas)
Impressoras Agfa :JETI 3348 Manual do Utilizador
(4 páginas)
(4 páginas)
Impressoras Agfa Printer Manual do Utilizador
(42 páginas)
(42 páginas)
Impressoras Agfa AP1100 Manual do Utilizador
(176 páginas)
(176 páginas)
© 2020, manymanuals-pt.com. Todos os direitos reservados. | 0.079 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentários a estes Manuais